Audi A4 B8 8K Silver Wheel Alloy Rim 17" ET:45 7,5J Star Spoke 8K0601025CE

Visual condition of the part 

The product shows signs of use visible in the photos. 

Audi A4 B8 8K Silver Wheel Alloy Rim 17" ET:45 7,5J Star Spoke is an original item from the Wheels category, designed for a precise fit with the driving parameters of Audi vehicles. The silver finish and aluminum construction ensure an attractive appearance while maintaining the appropriate rim stiffness and stability. This is a solution for drivers who expect proven geometry and a solid base for 17" tires.

Specifications and technical data

• SKU: 8K0601025CE-1
• Mark: Audi
• Condition: Used
• OEM Part Number: 8K0601025CE
• Substitutable numbers: 8K0601025CE, 8K0 601 025 CE
• Color: Silver
• Rim diameter: 17"
• Rim width: 7.5
• Offset (ET): 45
• Hole diameter: 112
• Number of holes: 5
• Rim material: Aluminium
• Category: Rims

Purpose and technical fitment

The rim has been designed as a component compliant with Audi factory standards, which translates into proper hub seating, correct wheel geometry, and stable vehicle handling. The design accounts for the appropriate diameter, width, and offset, ensuring that the suspension and steering system function correctly without unwanted changes in the vehicle's tracking.

The bolt pattern and number of mounting holes are adapted to standard Audi hubs, which facilitates installation and minimizes the risk of improper fitment. The aluminum material of the rim provides a favorable strength-to-weight ratio, which supports suspension performance and can positively influence ride comfort and the vehicle's reaction to road irregularities.

Construction, material, and finish

The rim is made of aluminum, which allows for a rigid yet relatively lightweight construction compared to classic steel rims. This type of material performs well in daily use and, with proper maintenance, ensures stable geometric parameters for a long time.

The silver color of the rim gives the vehicle a subdued, universal look that easily complements both light and dark body paints. This color is visually practical – minor dirt and typical signs of wear are less visible than with dark finishes, which makes it easier to maintain the aesthetics of the wheels.

Performance characteristics of the rim

The 17" diameter represents a popular compromise between comfort and handling precision, allowing for the use of tires with a reasonable profile that dampen road irregularities while providing adequate lateral stiffness. The rim width has been selected to work with typical tire sizes used on the Audi A4 B8, which promotes even pressure distribution and stability in corners.

The rim offset is adapted to factory design specifications, ensuring the wheel does not protrude excessively beyond the wheel arch nor sit too deep inside it. This is important for both safety and the durability of suspension components and wheel bearings. The properly selected bolt pattern and number of mounting holes ensure secure seating of the rim on the hub and even load distribution.

Practical application and mounting zones

An aluminum rim of this size will perform well in both daily city driving and on the highway, where stability at higher speeds is essential. The rim construction is prepared for typical road conditions, taking into account the loads resulting from braking, accelerating, and cornering. Thanks to the aluminum construction, it is possible to maintain a favorable unsprung mass, which is significant for the performance of shock absorbers and springs.

The product comes from the Wheels category, which means it is intended for direct installation in the vehicle's wheel zone as a load-bearing element for the tire. When selecting a rim, it is worth paying attention to the compatibility of parameters with the other wheels on the car to maintain uniform front and rear axle behavior and a consistent look for the entire set.

Condition, verification, and support

The rim is a used item, which in practice means that before installation, it is worth verifying its visual and technical condition for any signs of wear, such as scratches, paint chips, or minor edge deformations. This type of inspection allows you to assess whether the rim requires cosmetic refurbishment or can be installed without additional work.

If you want to better understand the process of evaluating and refreshing rims, our blog guide will be helpful – Used rims like new: a guide to buying and refurbishing aluminum rims, which describes key inspection stages, typical refurbishment methods, and practical tips regarding the use of aluminum rims.

Expanding your Audi wheel configuration

The 17" aluminum rim can be used both as a replacement for a damaged rim and as a component to complete a set of wheels (e.g., a summer or winter set). By maintaining factory mounting parameters, it is possible to maintain consistent vehicle handling and proper cooperation with safety systems, such as ABS or ESP, which rely on predictable wheel behavior.

If you are planning a comprehensive repair or upgrade of the wheel zone in your Audi and need other components from the same group, such as additional rims, wheel sets, or alternative rim designs, check the available parts in the Audi Wheels category.

For those interested in a broader approach to vehicle modification, including the use of used components in visual and technical projects, we also recommend the article The best used parts for tuning your car, which discusses how to consciously select tuning elements from the secondary market.